Operating Instructions - Skil PWRCORE 20 IW6739B-00 Guide D'utilisation

OPERATING INSTRUCTIONS

WARNING
or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain
industrial chemicals, and bleach or bleach-containing products, etc. can cause a short circuit.
WARNING
could result in serious personal injury.
WARNING
misuse and could result in a hazardous condition leading to possible serious injury.
WARNING
making adjustments, cleaning, or performing maintenance .
This cordless impact wrench must be used only with the battery packs and chargers
listed below:
2Ah
SKIL BY519701
SKIL BY519702
NOTICE: Please refer to the battery pack and charger manuals for detailed operating
information.
Attaching/Detaching Battery Pack
(Fig . 2)
Lock the variable-speed trigger switch "OFF"
on the tool by placing the direction-of-rotation
(forward/center-lock/reverse) selector in the
center position before attaching or detaching
the battery pack.
To attach the battery pack:
Align the raised rib on the batter pack with the
grooves on the tool, and then slide the battery
pack onto the tool.
NOTICE:
When placing the battery pack on the
tool, be sure that the raised rib on the battery
pack aligns with the groove inside the tool and
that the latches snap into place properly. Improper attachment of the battery pack can cause
damage to internal components.
To detach the battery pack:
Depress the battery-release button, located on the front of the battery pack, to release the
battery pack. Pull the battery pack out and remove it from the tool.
WARNING
locked in the center position when the tool is not in use or carrying it at your side .
To reduce the risk of fire, personal injury, and product damage due to a
short circuit, never immerse your tool, battery pack, or charger in fluid
If any parts are damaged or missing, do not operate this product until
the parts are replaced . Use of this product with damaged or missing parts
Do not attempt to modify this tool or create accessories not recom-
mended for use with this tool . Any such alteration or modification is
To prevent accidental starting that could cause serious personal injury,
always remove the battery pack from the tool when assembling parts,
Battery pack
2.5Ah
SKIL SKIL
BY519703 BY519601
Battery tools are always in operating condition . Therefore, the direction-
of-rotation (forward/center-lock/reverse) selector should always be
4Ah 5Ah
SKIL
BY519603
Fig . 2
Attach
Battery-Release Button
Charger
SKIL SC535801
SKIL QC536001
SKIL QC5359B-02
SKIL SC5358B-02
Detach
11