Skil PWRCORE 20 IW6739B-00 Guide D'utilisation page 4

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Do not overreach . Keep proper footing and balance at all times . This enables better
control of the power tool in unexpected situations.
Dress properly . Do not wear loose clothing or jewelry . Keep your hair and clothing away
from moving parts . Loose clothes, jewelry or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used . Use of dust collection can reduce dust-
related hazards.
Do not let familiarity gained from frequent use of tools allow you to become complacent
and ignore tool safety principles . A careless action can cause severe injury within a fraction
of a second.
Power tool use and care
Do not force the power tool . Use the correct power tool for your application . The correct
power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off . Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or remove the battery pack, if
detachable, from the power tool before making any adjustments, changing accessories,
or storing power tools . Such preventive safely measures reduce the risk of starting the
power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool . Power tools are
dangerous in the hands of untrained users.
Maintain power tools and accessories . Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the power tool's
operation . If damaged, have the power tool repaired before use . Many accidents are
caused by poorly maintained power tools.
Keep cutting tools sharp and clean . Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc . in accordance with these instructions,
taking into account the working conditions and the work to be performed . Use of the
power tool for operations different from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and free from oil and grease . Slippery
handles and grasping surfaces do not allow for safe handling and control of the tool in
unexpected situations.
Battery tool use and care
Recharge only with the charger specified by the manufacturer . A charger that is suitable
for one type of battery pack may create a risk of fire when used with another battery pack.
Use power tools only with specifically designated battery packs . Use of any other battery
packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a connection
from one terminal to another . Shorting the battery terminals together may cause burns or a
fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact . If
contact accidentally occurs, flush with water . If liquid contacts eyes, additionally seek
medical help . Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or modified . Damaged or modified
batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
4

Publicité

Table des Matières
loading

Table des Matières