5) Attach the engine stop switch lanyard
ON
OFF
START
w
8 Attach the engine stop switch lanyard
701026
8 Do not attach the lanyard to clothing
8 Avoid accidentally pulling the lanyard
6) Turn the main switch to "ON".
EMU00945*
Electric Start Model
7) Open the throttle slightly lifting the
701063
NOTE:
8 As a starting point, lift the lever just
8 The operation of the neutral throttle
3-17
to a secure place on your clothing, or
your arm or leg. Then, install the lock
plate on the other end of the lanyard
in the engine stop switch.
to a secure place on your clothing, your
arm or leg while operating.
that could tear loose. Do not route the
lanyard where it could become entan-
gled, preventing from functioning.
during
normal
engine power means the loss of most
steering control. Also, without engine
power, the boat could slow rapidly.
This could cause people and objects in
the boat to be thrown forward.
neutral throttle lever upwards partial-
ly. You may need to change the throt-
tle opening slightly depending on
engine temperature.
After the engine starts, return the
throttle to the original position.
until you feel resistance, then lift slight-
ly more.
lever is possible only when the remote
control lever is in "N".
GB
operation.
Loss
of