Mechanical Cleaning/Disinfecting - MELAG MELAstore-Box 100 Consignes D'utilisation

Phase I
Wipe off gross debris prior to cleaning.

Phase II
Dry the instrument with a lint-free cloth or medical compressed air.

Phase III
Carry out wipe disinfection

Phase IV
When using aldehyde-free disinfectants:

After the specified exposure time (at least 1 min), rinse the disinfected surfaces under running

DI water.
Drain any remaining water fully.

Phase V
Dry the product with a lint-free cloth or in a heating cabinet.


Mechanical cleaning/disinfecting

The cleaning and disinfection device must be of tested and approved effectiveness.

Follow the sterilizer manufacturer's recommendations.
Do not use rinsing agents.

Use appropriate insert racks for machine cleaning according to manufacturer's instructions.

Final rinsing with the aid of de-ionised water (DI water).

For more information please read the latest instructions for use by the sterile container manufacturer

(http://www.bbraun.co.uk).
Chapter 3 – Cleaning and disinfection
13