MELAG MELAstore-Box 100 Consignes D'utilisation page 27

Unloading the sterilizer
WARNING
Risk of burns due to a hot sterile container after sterilization!
Always wear protective gloves when unloading the sterilizer.

Checking and commissioning the sterile materials
The contents of a sterile container can only be considered to be sterile if the sterile container is sterilized,
stored and transported as specified. If this is not the case, the sterile materials must be processed again.
WARNING
Risk of contamination from improperly sterilized materials!
Prior to commissioning the sterile materials, check to ensure that the sterilization was

successful.
Verify that the indicator color has changed (if available).

Make sure that all parts of the sterile container, particularly the lid locks, are intact.

Ensure that the sterile container lead seal on the sterile container is intact.

Storing the sterile containers
PLEASE NOTE
The sterile containers may be stored in stacks.
Store sterile containers in a dry, clean and protected place.

Observe the storage period and storage conditions as per DIN 58953-8 and DIN 58953-9,

see Storage periods for sterile materials: extract from DIN 58953-9.
Chapter 2 – Working with the sterile container
11