Side Brush; Important - TSM DURASWEEP 130 B Mode D'emploi

5.2

Side brush:

The side broom, Detail 1 Fig. 5, acts as a
conveyor for the dust and debris and is
used exclusively for
corners, profiles, and must be disabled
(raised) once they have been cleaned to
avoid lifting unnecessary dust and because
the side broom cleans less thoroughly than
the central broom.
5.3 Central brush:
The central broom Detail 2 Fig. 5 is the
main part of the machine, which allows
dust and debris to be loaded into the debris
hopper; it is possible to request different
bristle stiffness and type, depending on the
type of material will be collected or the type
of floor; the height can be adjusted as the
bristle length wears down (see Chapter
11).
IMPORTANT: do not collect cords, wires, packaging straps, sticks, etc that are longer than 25 cm as they may
get twisted around the central and side brooms and damage them.
5.4 Filtering
system:
During operation, the
filtering system works so
that the machine does not
lift dust into the
surrounding environment,
and is obtained by a bag
filter Detail 2 Fig. 5/A
(standard version) or by
8 cartridge filters
(Optional) Detail 3 Fig.
5/A.
cleaning edges,
TSM - Technological Systems by Moro Srl
Via F.lli Zambon,9 - 33080 Fiume Veneto (PN) – Italy
Tel. +39.0434.564167 - Fax +39.0434.954069
www.tsmitaly.com – sales@tsmitaly.com
DURASWEEP 130 B
OPERATING MANUAL
39
V01