TSM DURASWEEP 130 B Mode D'emploi page 35

2. Retrieve the relative ramps for the pallet and put them in position, screwing them on with the supplied screws, as
shown in Fig. 2; remove the pieces of wood that surround the wheels and disengage the parking brake Fig. 3,
pressing it to release the brake lever. It is now possible to push the machine onto the slide (this must be carried out
when no one is stationed in front of the machine and on a spacious flat surface)
At the end of the unpacking operation, take off and store the hooks (eye bolts), and install the right and left side brooms,
as shown in paragraph "side broom replacement" in chapter 11.
TSM - Technological Systems by Moro Srl
Via F.lli Zambon,9 - 33080 Fiume Veneto (PN) – Italy
Tel. +39.0434.564167 - Fax +39.0434.954069
www.tsmitaly.com – sales@tsmitaly.com
35
DURASWEEP 130 B
OPERATING MANUAL
V01