Preparation - TSM DURASWEEP 130 B Mode D'emploi

1

PREPARATION

1.1 Unpacking
Once the external packaging has been removed, take the machine off of its pallet; this operation can be carried out in
two ways:
1. Use a three-pronged hook with a suitable capacity for the weight of the machine (provided on the CE plate). Lift the
motor hood until it is resting on the steering wheel, all the way open. Screw the eye-bolt all the way into the threaded
hole on the platform by first of all taking the casing off of the motor (Part. 7 Fig. 4). Hook all of the prongs onto the
lifting hooks (all three) marked as A/B/C in Fig. 1 and using a forklift or bridge crane (with a suitable capacity for the
machine), lift it off of the pallet and very slowly place it on the ground.
THE MACHINE CAN ONLY BE LIFTED WHEN ALL THREE STRAPS ARE HOOKED ONTO THE
RESPECTIVE LIFTING HOOKS.
TSM - Technological Systems by Moro Srl
Via F.lli Zambon,9 - 33080 Fiume Veneto (PN) – Italy
Tel. +39.0434.564167 - Fax +39.0434.954069
www.tsmitaly.com – sales@tsmitaly.com
34
DURASWEEP 130 B
OPERATING MANUAL
V01