Switching On And Off; Setting - Atag HL62 E Serie Mode D'emploi

USE
General

Switching on and off

66
Read the separate safety instructions before using the
device!
On the glass work surface the 4 cooking zones are indicated by a circle.
The diameter of the base of the pan should correspond as closely as
possible with the diameter of the cooking zone.
switching on
Place a pan on a cooking zone and turn the control knob to the desired

setting.

The cooking zone will then heat up. The cooking zone switches on and
off automatically to provide the power you have set. At lower settings the
cooking zone is off for a long time and on from time to time. At higher
settings the cooking zone is on for a long time and off from time to time.
Switching off
Turn the knob to the zero position.
setting