Connecting Up And Checking Hob - Atag HL62 E Serie Mode D'emploi

INSTALLATION GUIDE build in HL62..E
Secure the hob using the fasteners supplied.
In the case of worktops thinner than 40 mm a filler block has to be used
between the fasteners and the worktop. The screws must be screwed into
the pressed holes.

Connecting up and checking hob

Make the electrical connection by inserting the plug in the socket or set
the switch of the power supply cable (in the case of a fixed
connection) to 1.
Test to check the hob is operational.
82