Residual Heat Indicator - Atag HL62 E Serie Mode D'emploi

USE
Residual-heat indicator
The indicator shows that the cooking zone is still hot, and goes out as
soon as the glass top reaches a safe temperature.
Residual heat is indicated by a light for each cooking zone on the glass
hob.
Switching on the double-ring cooking zone
Switching on
Turn the adjusting knob to the maximum setting (hard against the stop)
and then choose a setting.
The two cooking zones will now always give off heat together.
Switching off
Turn the adjusting knob to the zero position.
Next time you switch the cooking zone on again only the inner cooking
zone will come on.
You can never use the outer cooking zone on its own.
setting
67