Rotation Speed Adjustment Key; Convenient Functions - NSK Ti-Max NLX nano Manuel D'utilisation

5-4 Set the maximum speed using the Rotation Speed Adjustment Key
( ) . (Fig. 8)
5-5 Select FWD/REV rotation using the FWD/REV Select Key. (Fig. 9)
Lamp ON REV
Lamp OFF FWD
5-6 The micromotor operation will be controlled by the air switch/Foot
Pedal of the delivery unit.

6. Convenient Functions

6-1 Foot Air Calibration
( Unit of Display = kgf/cm
By using this function, it enables you to use the maximum speed, 40,000 min
delivery system is not high enough, by setting upper and lower limit of the air pressure.
NOTICE
Do this adjustment function after your purchase. Once it is adjusted, it will be memorized, and there is no need to
do this everytime.
 ) Press M2 key and Rotation Speed Adjustment Key ( ) at the same time for more than 3 seconds.
2 ) With alarm sound, Indicator will change to "C" (Lower air pressure limit setting mode).
3 ) By pressing the FWD/REV Rotation key, Speed Indicator shows " 0.0" and "Eb" mutually.
4 ) By stepping the Foot Pedal of the delivery unit, Indicator shows the present air pressure.
NOTICE
· The displayed air pressure is only a guideline. Measure the correct air pressure with the air gauge.
· The unit of displayed air pressure is "kgf/cm
ex ) 0.
0.0MPa
.0 0.MPa
3.0 0.3MPa.
5 ) Control the Foot Pedal of the delivery unit, and maintain the air pressure between "0.3 " - ".0". Press M2 key for
more than 3 seconds to memorize the lower limit of the air pressure.
NOTICE
· Default value is set to "0.5" .
· When the air pressure is not between "0.3" - ".0", it is displayed "Eb", and will not be memorized
)
2
2 ". For other unit, refer the bellow.
Indicator
( rpm ) , even though the air pressure of the
-
6
Increase
Decrease
Fig.8
FWD/REV Lamp
PUSH
Fig.9