4.3 Pre-set armrests
Pre-set armrest height
Pre-set reclining flip back armrests
Armrest height
Fine or gross adjustment, it is a two-part process:
Part 1 (Fig. 4.8)
1. Loosen (A) in order to adjust (B).
Part 2 (Fig. 4.9)
2. Loosen (A) in order to adjust (B).
3. Retighten the screws (A in Fig. 4.8) with a torque of 30Nm.
Armrest pad depth (Fig. 4.10)
1. Loosen both screws (A) by one turn.
2. Adjust (B) to the desired position.
3. Tighten (A) with a torque of 9Nm.
Armrest width adjustment (Fig. 4.11 and 4.12)
1. Using 8mm hex tool, loosen both screws (A) by one turn.
2. Adjust (B) in or out to the desired position.
3. Tighten (A) with a torque of 50Nm.
WARNING!
All screws should be checked periodically for tightness. A loose arm
pad could slip down when pressed. See maintenance schedule in
section 7.1.
Sedeo Pro Advanced/Advanced UP Rev.A
B
A
B
A
B
A
B
A
B
B
Fig. 4.8
Fig. 4.9
Fig. 4.10
Fig. 4.11
Fig. 4.12
13