Setting Up The Seating System; Pre-Set The Seat Plate Width - Sunrise Medical QUICKIE Sedeo Pro Advanced Manuel D'utilisation

4.0 Setting up the seating system

The average wheelchair user does not exist. This is why Sunrise Medical
wheelchairs can be adjusted according to specific needs of the user.
In this, we make a distinction between wheelchair settings and
wheelchair seating adjustment options. Settings are carried out once,
the first time the wheelchair is going to be used. They must be executed
by qualified specialist, unless explicitly stated otherwise. Seating
adjustment options can be carried out by the user. These adjustment
options do not require the use of tools.
Tool and calibration marks
A M5 Allen key is supplied with the seating system. This can be used by
a professional for adjusting all of the seating system settings. The M5
Allen key (A) can be found on the frame at the location indicated in Fig.
4.1.

4.1 Pre-set the seat plate width

Lift the seat cushion off the Velcro© strips to access the seat plates.
• Use a 5.0 mm Allen Key, (Hex Wrench).
• Adjust the seat plate width by loosening the four/six screws, circled in
Fig. (4.2) for the UP and in Fig (4.3) for the Sedeo Pro Advanced.
• Slide the plates outwards or inwards to achieve the required seat
width.
• The seat width is indicated by the scale that runs alongside each slot
(Fig.4.2).
• Tighten the four/six screws securely.
CAUTION!
After finishing seat width adjustments, make sure that the armrest can
be flipped up without colliding with the backrest. Not doing so can lead
to damaging the product severely.
10
A
B
A
B
Sedeo Pro Advanced/Advanced UP Rev.A
Fig. 4.1
Fig. 4.2
Fig. 4.3