Learn To Ride; Installation Of Lithium-Ion Battery - Segway eScooter E110SE Manuel D'utilisation

2 Powering-on and activation
a. Power on:
Option 1: Power on with the key [see Ignition].
37
Option 2: Press the ON button on the remote
control [see Functions of the
41
Remote Control for details].
b. Activation:
Enable AirLock: Enable Bluetooth on your
phone, scan the QR Code on the dashboard to
download and install the app > register and log
in > click "Search device" > Connect. Follow
the instructions to bind your Segway eScooter.
3 How to power on/lock the vehicle after activation
There are four ways to power on/lock the vehicle.
Option 1: Use the remote control: Press ON/OFF button to unlock and power on the vehicle; press the
lock button to power off and lock. [See
41
Option 2: Use the key: Insert the key and turn it clockwise to ON position to power on or counterclockwise
to LOCK position to lock. [see Ignition]
37
Option 3: Press the Auto button [see Controller Switch]
36
Option 4: Via the Segway-Ninebot app as shown below:
1. Press the On/Off button on the vehicle homepage.
2. Press "Confirm" on the popped-up window.
3. When the indicator on the dashboard is pre-light, press and hold the Auto button to power on/lock the
vehicle.
13
Option 1
Option 2
ON position
Scan
Register Log in
Functions of the Remote Control for details]

4. Learn to Ride

a. When powered on via the App, sit on the
cushion and retract the side stand.
c. The "Ready" indicator lights up.
Results: 1 device
Search device

5. Installation of Lithium-ion Battery

For E110SE / E110S:
Plug
1. Place the battery in.
b. Press the Auto Key.
d. Squeeze the throttle inwards to go.
NOTE: Before installation, make sure there is no foreign object
in the battery compartment and there is only one plug inside.
2. Connect the battery plug.
14