Charge The Battery - Segway eScooter E110SE Manuel D'utilisation

For E125S:
NOTE: Before installation, make sure there are no foreign objects in the
battery compartment with two plugs inside.
Plug
1. Place the battery (a) in.
a
3. Connect the battery plug on the corresponding
side.
a
5. Connect the battery plug(s).
b b
15
2. Push the battery (a) to the inner end.
a
4. Place the battery (b) in the compartment.
a b
* The battery (a) means the first battery; (b) is for
the second battery.

6. Charge the Battery

1. Use the key to open the seat bucket
and pull the foot panel switch to
unlck it.
3. Connect the charging cable to the
charging port on the battery and then
plug into a power socket.
* For how to charge the vehicle, see [ Charging Port] at page 8.
16
2. Open the driver's footrest, which is also
the battery compartment lid, and take
out the battery.
* The indicator on the battery charger
shows solid red when charging and
turns green when finished.
16