Learn To Ride - Segway B Serie Manuel De L'utilisateur

7. Learn to Ride

WARNING
Always wear a helmet and other protective gear to minimize any possible injury in the learning process.
Always abide by local laws and traffic rules.
Power on
The vehicle can be powered on in one of the following ways:
Tap the NFC card on the dashboard. You will
hear a beep when the vehicle is powered on
successfully.
15
Enable the AirLock in the App. The vehicle will
power on when you sit on the saddle, or press
and hold the Auto key.
Riding
Retract the kickstand, sit down on the saddle and with both feet on the ground. Gently turn the throttle
inward to start your trip.
NOTE:
Before a rider is seated on the saddle, the status light is orange and the throttle is inactive. If the rider
leaves the seat during riding, an alarm will sound and disabling the throttle.
Locking
Release the throttle and pull both brake levers. After the vehicle has come to a stop, kick the kickstand in
the down position to support the vehicle upright.
You can lock your vehicle in the following ways:
Auto lock
Enable the 'Auto lock' feature in the app. When you walk
away with the phone, the vehicle will lock automatically.
Press and hold the Auto key.
Tap the NFC card.
NOTE:
After locking, please turn the handlebar to its left end
to ensure that the Handlebar Lock is activated.
The manual switch of the Handlebar Lock is located
inside the seat bucket. You can operate the switch to
enable/disable the lock.
Anti-theft Alarm
When the vehicle is locked, if there are any abnormal
movements detected, the status light will flash red and
green and a continuous alarm will start to sound.
16