First Use - Segway eScooter E110SE Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Symbol
Symbol Name
Description
Riding mode
Indicates the current gear.
Remaining battery level
Bars of remaining battery.
Controller switch
36
Left combination switch
Passing/Driving
beam switch
Turn signal switch
Cruise switch
Horn switch
Symbol
Symbol Name
Meaning
Passing/Driving
1. Toggle it to the right to activate the high beam; toggle it to the center to turn off the high beam.
beam switch
2. Slide it all the way to the left to turn on the overtaking signal; Release to cancel the overtaking signal.
When toggled to the left, the left turn signal turns on. The button resets automatically after releasing.
Turn signal
Toggle it to the center and press to turn off the left turn signal.
switch
When toggled to the right, the right turn signal is on. The button resets automatically after releasing.
Place it at the center and hold down to turn off the right turn signal.
Horn switch
When pressed, the horn is sounded to alert pedestrians or other vehicles.
When pressed, the vehicle will cruise at the current speed. The cruise control can be cancelled by
Cruise switch
pressing the button again, turning the throttle, or by braking.
Riding mode switch
Press "+" to increase the mode (higher speed), and press "-" to decrease the mode (lower speed)
When the vehicle is on, double-press to open the seat bucket or press and hold to switch off the vehicle. If the
Auto key
AirLock is enabled in the App, hold this button while the paired phone is within range to turn on the vehicle.
When the side stand is folded up and the rider is on the seat, press this key and READY indicator is on.
Hazard warning
When the button is pressed, both the left and right turn signals will flash to alert pedestrians and other
switch
vehicles.
11
Comments
Right combination switch
Riding mode switch
Hazard warning
switch
Auto key
Ignition
37
OFF position
The vehicle is powered off.
ON position
The vehicle is powered on.

3. First Use

For your safety, please go through the New Rider Tutorial in Segway-Ninebot App.
Turn on
1
a. Open the seat
bucket with your
key, and pull the
foot panel switch
to unlock it.
c. Connect the
battery plug.
OPEN position
Rotate left to open the seat bucket.
LOCK position
Turn the handlebar to the very left,
then turn the key to the left end while
pressing it down, so that the handlebar
is locked.
b. Lift the lid.
d. Close the lid.
12

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Escooter e110sEscooter e125sEscooter e serieE serieEscooter

Table des Matières