H336-K/Ss/Bc Door Assembly; H336-K/Ss/Bc Door And Fphk/Fpmk Trim Installation - Napoleon HIGH COUNTRY NZ3000 Instructions D'installation Et D'opération

Masquer les pouces Voir aussi pour HIGH COUNTRY NZ3000:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6.3.5 H336-K/SS/BC DOOR ASSEMBLY

Left Door Assembly
Left Door Assembly
Left Door
Handle
Washer

6.3.6 H336-K/SS/BC DOOR AND FPHK/FPMK TRIM INSTALLATION

TOP
INSET
Install the upper grill using the 4 screws provided as illustrated.
Install the lower grill using the 2 screws provided as illustrated.
Install doors.
Right Door Assembly
Latch
Washer
Lock
Nut
Nut
Lock
Adjustment
HINGE
BOTTOM
INSET
Right Door Assembly
Flat
Right Door
Handle
Hinge
Pin
Set
Screw
To adjust the door alignment, loosen the set screw on the
side of each door hinge. With the doors closed and not
tightly
latched, rotate the hinge pin using a slotted screw driver to
the desired position and tighten the set screw.
Left Door
Install the left door handle through
the left door assembly. Secure
using the lock washer and nut
provided.
** The fi nal angle of the left door
handle should mirror the right
door handle in the closed position.
Tighten the nut to secure the
handle at the desired angle.
Install the hinges to the fi rebox
front using the screws supplied.
Right Door
Install the right door handle
through the right door assembly.
Install the three fl at washers and
the door latch as illustrated.
Secure using the lock nut
provided. Do not over tighten.
Handle must rotate freely.
Door latch adjustment may be
required, move one or more
washers as shown.
Hinge
Pin
Set
Screw
W415-0711 / D / 05.09.13
27
EN

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

High country nz3000h-1

Table des Matières