Do Not Disturb - Motorola WAVE TLK 100i Mode D'emploi

Chapter 12
Menu
You are able to access the menu through the Menu/Programmable button.
The following are the available features in the Menu.
Table 6: List of Features
Feature
All Alert Tones
Display Brightness
Voice Announcements
Do Not Disturb (DND)
Scan
Location
Wi-Fi
Cellular
Bluetooth
12.1

Do Not Disturb

Do Not Disturb (DND) allows you to change the status of the radio from available to unavailable.
When DND is enabled, an LED blinks and you will not be able to receive any private call. A negative
tone sounds when a call is initiatited to indicate that the call cannot be connected.
12.1.1
Turning DND On or Off
NOTE: Depending on the configuration of your radio, press or press and hold the Menu/
Programmable button to directly access the feature. Else, manually enter the feature with the
following procedure.
Procedure:
1 Press the Menu/Programmable button.
2 Locate the Do Not Disturb (DND) icon.
3 To turn on DND, press the Volume Up button. To turn off, press the Volume Down button.
If DND is on, the following occurs:
• Voice Announcement sounds Do Not Disturb On.
Description
Allows you to enable and disable All Alert Tones.
Allows you to adjust the display brightness on your radio.
Allows you to enable and disable the Voice Announcements.
Allows you to change the mode of your radio from available to
"do not disturb".
NOTE: When DND is enabled, you will not be able to
receive any group call, quick group call, or private call.
Allows you to enable and disable the Scan feature.
Allows you to enable and disable the Global Positioning System
(GPS) feature.
Allows you to enable and disable the Wi-Fi modems.
Allows you to enable and disable the Cellular modems.
Allows you to enable and disable the Bluetooth.
MN007302A01-AC
Menu
31