Service And Repairs; Warranty - Flex LW 1503 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Instruction manual
blown fuses or open circuit breakers in
the line.
GEAR HOUSING
The gear housing should never be
loosened or opened, except by a FLEX
authorized service center. Doing so will
void the product warranty.
BRUSH INSPECTION AND
LUBRICATION
For your continued safety and electrical
protection, brush inspection and
replacement on this tool should ONLY be
performed by an authorized service
center for FLEX Power Tools.
At approximately 100 hours of use, take
or send your tool to your nearest
authorized service center for FLEX
Power Tools to be thoroughly cleaned
and inspected; worn parts replaced;
and when necessary, relubricated with
fresh lubricant if required; reassembled
with new brushes; and performance
tested.
Any loss of power before the above
maintenance check may indicate the
need for immediate servicing of your tool.
DO NOT CONTINUE TO OPERATE
TOOL UNDER THIS CONDITION. lf
proper operating voltage is present,
return your tool to a FLEX authorized
service center for immediate service.
14

SERVICE AND REPAIRS

All quality tools will eventually require
servicing or replacement of parts due to
wear from normal use. These
operations, including brush inspection
and replace-ment, should ONLY be
performed by an authorized service
center for FLEX Power Tools.
To prevent injury, a damaged power cord
must be replaced by the manufacturer or
his customer service.
All repairs made by these agencies are
fully guaranteed against defective
material and workmanship. We cannot
guarantee repairs made or attempted by
anyone other than these agencies.
Should you have any questions about
your tool, feel free to write us at any time.
In any communications, please give all
information shown on the nameplate of
your tool (model number, type, serial
number, etc.).

WARRANTY

FLEX NORTH AMERICA
LIMITED ONE YEAR
WARRANTY
FLEX North America warrants its
Professional Power Tools for a period of
one year from the date of original
purchase. We will repair or replace at our
option, any part or parts of the product
and accessories covered under this
warranty, which, after examination,
prove(s) to be defective in workmanship
or material during the warranty period.
For repair or replacement, return the
complete tool or accessory,
transportation prepaid, to your nearest
Authorized Service Station. Proof of
purchase may be required. This warranty
does not apply to repair or replacement
LW 1503

Publicité

Table des Matières
loading

Table des Matières