Flex LW 1503 Notice D'utilisation page 12

Instruction manual
TO START AND STOP
THE TOOL
DANGER
Any further use or operation is not
permitted under such circumstances!
7
1. Slide the switch button (S), Fig. 7,
forward to turn tool "ON". When
released, the switch will return to the
"OFF" position.
8
2. To lock the switch in the "ON"
position: with the switch "ON", press
the front end of the switch button (L)
Fig. 8, in toward the tool housing.
To release the switch lock, press the
back end of the switch button in
toward the tool housing.
12
USING THE POWER TOOL
DANGER
9
When using the tool for a horizontal
appli-cation, work the tool as shown
in Fig. 9.
10
When using the tool for a vertical appli-
cation, work the tool as shown in
Fig. 10.
11
LW 1503