Coffee Circuit Cleaning Cycle (Brew Group Wash Cycle) - Saeco PRIMEA Touch Plus Mode D'emploi

32 prograMMIng The MaChIne

COffEE CIRCUIT CLEANINg CYCLE (bREW gROUP WASH CYCLE)

To clean the machine's internal circuit used for brewing coffee.
It is advisable to perform this wash cycle after 500 coffee brewing cycles, or monthly.
Packages of Saeco detergent tablets may be purchased directly from Saeco or an authorized service center.
note: before performing this function make sure that:
1. a large enought container is positioned under the spout.
2. the appropriate tablet for cleaning the brew group has been inserted into the
pre-ground bypass doser.
3. the water tank contains a suffi cient quantity of water.
THE WASH CYCLE CANNOT bE INTERRUPTED.
A PERSON mUST bE PRESENT DURINg THE OPERATION.
Press the "coffee cleaning cycle" icon and then "start cleaning cycle" to start the wash cycle.
coffee start
cleaning cleaning
cycle cycle
THE mAINTENANCE AND CLEANINg Of THE
bREW gROUP IS DESCRIbED ON PAgE 43.
LOCK DISPLAY
To clean the display. The touch screen display can be cleaned with a soft dampened cloth or with the appropriate
detergents for cleaning displays sold on the market.
SOLVENTS, ALCOHOL, HARSH DETERgENTS AND/OR SHARP ObjECTS THAT CAN DAmAgE
THE DISPLAY mUST NOT bE USED.
Press the "lock display" button
1
lock
display
display
locked
To reactivate the display, press "unlock" on the lower right-hand corner and then
(within two seconds) "unlock" in the upper left-hand corner (this button appears
only after having pressed the previous button).
All manuals and user guides at all-guides.com
cleaning coffee circuit –
please wait
cleaning...
Wait for the cycle to fi nish. The machine will
return to the main menu.
2
unlock
display
locked
unlock