Transceiver Password - Kenwood NX-5700 Mode D'emploi

Speaker Type
o
Allows you to select a speaker type that suits the optional external speaker
connected.
Squelch Level <SQL>
o
Allows you to adjust the transceiver squelch level.
When adjusting the squelch level, use the [J] and [K] keys to increase and decrease
the squelch level from 0 (open) to 9 (tight). The default setting is 5.
Squelch Off <SQ_Off>
o
Allows you to turn the transceiver squelch off, to better hear weak signals on the
channel.
Squelch Off Momentary <SQ_Off>
o
Press and hold this key to momentarily turn the transceiver squelch off. Releasing
this key turns the transceiver squelch back on. While squelch is off, you can better
hear weak signals on the channel.
Stack <Stack>
o
Allows you to check the records of received calls and messages received.
Status <Status>
o
Allows you to send status messages selected from the Status List.
Surveillance <Srvlnc>
o
Allows you to disable the alert, tone, backlight and LED functions.
System Search <Search>
o
Allows you to view the current Trunking site. With the site displayed, press and hold
the key programmed as [System Search] to enter Search mode. The transceiver
begins searching for a new site and "Search" appears on the display. When a site is
found, searching ends and the transceiver switches to the new site.
Talk Around <TA>
o
Allows you to toggle Talk Around ON and OFF. Talk Around redirects the transceiver
signals directly to other party members rather than relaying the signals through a
repeater.
Talkgroup Reset <TG_Rst>
o
Allows you to reset the Talkgroup ID of a channel.
Transceiver Password <Passwd>
o
Allows you to set a password to lock the transceiver.
TX Audio Equalizer (High)
o
Allows you to set the audio response for high frequencies.
27