Kenwood NX-5700 Mode D'emploi page 14

3
Press the [ ] key to view the function list.
4
Press [J]/[K] to select a function item.
On an optional microphone with keypad, you can enter a function number directly.
●
5
Press the [ ] key to set up the selected function item.
Press the [
●
6
Press [J]/[K] to select your desired setting.
For settings with more than one level, repeat steps 5 and 6.
●
7
Press the [ ] key to set the selected setting and exit Menu mode.
Press the [
●
Press the [
●
KEY MODE
Your transceiver operations vary according to the functions that your dealer has
programmed onto the transceiver keys. Refer to "FUNCTION LIST" {p. 15} for the
available programmable functions.
14
] key to return to the category list.
] key at any time to return to the previous display.
] key at any time to exit Menu mode.