Carton Contents; Install Wheels And Lifting Bracket - Westinghouse WGen20000 Manuel De L'utilisateur

Générateur d'onduleur numérique, puissance d'opération 20,000 watts, puissance de pointe 28,000 watts
Masquer les pouces Voir aussi pour WGen20000:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CARTON CONTENTS

Weight hazard. ALWAYS have assistance when lifting
the generator.
1. Carefully open the carton.
2. Remove and save the carton contents.
3. Remove and discard the packing tray.
4. Unfold the top of the plastic bag enclosing the generator.
5. Carefully cut the vertical corners of the carton to access
the generator.
6. Recycle or dispose of the packaging materials properly.
CARTON CONTENTS
• User Manual
• Quick Start Guide
• Bottle of SAE 10W-30 Oil
• Battery charger
• Spark plug socket wrench
• Oil Funnel
• Assembly wrench
• Wheel and lifting hook components
Item
• Lifting hook
• Flange bolt, M8
• Wheel
• Axle pin
• Washer
• Cotter pin
If any parts are missing, contact our service team at
service@wpowereq.com or call 1-855-944-3571.
CAUTION
Quantity
1
4
2
2
4
4
COMPONENTS

INSTALL WHEELS AND LIFTING BRACKET

Assembling the generator will require lifting the unit on
one side. Install the wheels before adding fuel or oil.
Lifting hazard. Use two people when installing the
wheels. Refer to LIFTING HOOK in the OPERATION
section.
1. Place generator on a flat surface.
2. Align the lifting hook bracket with the mounting brackets
on the top of the fuel tank. Secure with four M8 flange
bolts.
3. Use the Lifting Hook to raise the unit enough to install
the wheels as shown.
Note: The wheels are only intended for hand transport.
The wheels are not suitable for towing the generator
either on or off-road.
Westinghouse Outdoor Power Equipment, LLC | 11
NOTICE
CAUTION
Cotter pin
Washer
Cotter pin
Wheel
Axle pin

Publicité

Table des Matières
loading

Table des Matières