Assembly; Carton Contents; Install Feet And Wheels - Westinghouse WGen7500 Manuel De L'utilisateur

ASSEMBLY

CARTON CONTENTS

Weight hazard. ALWAYS have assistance when lifting
the generator.
1� Carefully open the carton.
2� Remove and save the carton contents.
3� Remove and discard the packing tray.
4� Unfold the top of the plastic bag enclosing the generator.
5� Carefully cut the vertical corners of the carton to access
the generator.
6� Recycle or dispose of the packaging materials properly.
CARTON CONTENTS
• User manual
• Quick Start Guide
• Remote start key fob (attached to recoil starter)
• 1.16 Quart (1.1 Liter) bottle of SAE 10W-30 Oil
• Battery charger
• Spark plug socket wrench
• Oil Funnel
• Assembly wrench
Wheel and mounting foot components
• Mounting foot (2)
• Flange bolt, M8 (4)
• Wheel (2)
• Axle pin (2)
• Washer (2)
• Cotter pin (2)
If any parts are missing, contact our service team at
service@wpowereq.com or call 1-855-944-3571.

INSTALL FEET AND WHEELS

Assembling the generator will require lifting the unit on
one side. Install the mounting feet and wheel before
adding fuel or oil.
1� Place generator on a flat surface.
2� Tip the generator on a piece of cardboard or other soft
material to protect the frame paint and prevent the
generator from sliding.
3� With the included wrench, install the mounting feet to
the frame as shown.
4� Install the wheels as shown.
Note: The wheels are only intended for hand transport.
The wheels are not suitable for towing the generator
either on or off-road.
Westinghouse Outdoor Power Equipment, LLC | 11
ASSEMBLY
NOTICE