Blower Duct Routing Configurations A - H - Zephyr DLI-E30ASX Mode D'emploi

Internal Blower (DBI-600A) - Front Mounted to Downdraft
Electrical Panel
(Mount in remote location)
MODEL 11030132
5-foot Extension
Cable (sold separately)
(Only required if electrical panel
is more than 2-feet away from
downdraft. Use up to 2 extension
cables connected together.)
Blower duct routing configuration A
MODEL DBI-600
Internal Blower (sold separately)
("Down" discharge shown. Blower can
also be rotated for "Left" or "Right"
discharge.)
8-inch Round
Straight Duct*
8-inch Round Elbow*
MODEL ZRC-00LF
Non-Duct Recirculating Kit with
Kickspace Grille (sold separately)
(Only required for non-duct
applications. "Front" discharge
shown. Kit can also be rotated for
"Left" , "Right" or "Rear" discharge.)
23
8-inch Round
Wall Cap*
8-inch Round
Straight Duct*
* As required - sourced locally.