Optional Accessories - Zephyr DLI-E30ASX Mode D'emploi

Hotte de ventilation à aspiration descendante
Masquer les pouces Voir aussi pour DLI-E30ASX:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Optional Accessories

Accessory
Model DDA-0002
MODELS
DDS-0030
DDS-0036
MODELS
MUA008A
MUA010A
MODELS
DDT-0030
DDT-0036
Description
REMOTE UP/DOWN CONTROL
Use when you cannot reach the UP/
DOWN Button on the downdraft chimney.
Can be located on counter top, face of
cabinetry or on the side cabinet of an
island. Cut-out size: 2 1/4" H x 2" W
Cannot be used where remote control
will interfere with cooking, where hot
pans could be set, or where hot liquids
could be spilled on the control.
(Remote wiring connects with 6-pin
connection)
GAS COOKTOP SEAL KIT
Recommended for use with all gas
cooktops. Includes trim bracket and trim
seal.
30", 36" widths.
MAKE-UP AIR DAMPER
Use to provide make-up air (when called
for) to keep the home comfortable by
allowing the downdraft to operate at
optimum levels.
RANGE TRIM KIT
Use with free-standing range - where a
gap is present between back of range
and downdraft.
30", 36" widths.
Optional Accessories
Accessory
MODEL 11030132
MODEL ZRC-00LF
MODEL Z0F-C006
MODEL AK00070
MODEL AK00071
MODEL AK00072
21
Description
EXTENSION CABLE - 5-FT.
Use where electrical panel is remotely
mounted. Extends electrical panel cable
an additional 5 feet.
NON-DUCT RECIRCULATING KIT
Use where ducting is not feasible or
available. Mount to toe kick or base of
a cabinet and attach directly to Model
DBI-600A Blower using 8" round duct.
Kit can be rotated so that the exhaust is
not directly at your feet. Includes
recirculating filter and decorative
cover plate.
RECIRCULATION FILTER REPLACEMENT
Replacement filter for ZRC-00LF Non-
Duct Recirculating Kit. Use to effectively
capture cooking contaminants.
1-7/8" X 19" TO 8" ROUND
TRANSITION
Rectangular to 8" round transition for
left, right, or rear exhaust - using Model
DBI-600A Blower. Can be attached
to downdraft unit or rectangular duct
(AK00072). Includes S-clips for easy,
secure attachment.
1-7/8" X 19" TO 10" ROUND
TRANSITION
Rectangular to 10" round transition for
left, right, or rear exhaust - using
external blower. Can be attached to
downdraft unit or rectangular duct
(AK00072).
RECTANGULAR ADAPTOR FOR
1-7/8" X 19"
Use to connect 1-7/8" x 19" rectangular
duct directly to downdraft when using
side or rear exhaust.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dli-e36asx

Table des Matières