Station Order Setup - PERFECTPRO UBOX 500R Mode D'emploi

Dynamic Range Control (DRC) setting – DAB
2
Rotate the Tuning control knob to find "DRC". Press
and release the Tuning control knob to enter adjustment
mode.
3
Rotate the Tuning control knob to select required DRC
setting (default is off).
DRC off DRC is switched off, Broadcast DRC will be
ignored.
DRC high DRC is set as sent by broadcaster.
DRC low DRC level is set to 1/2 that sent by broadcaster.
4
Press and release the Tuning control knob to confirm the setting.
NOTE
Not all DAB broadcasts are able to use the DRC function. If the broadcast does not support
DRC, then the DRC setting in the radio will have no effect.

Station order setup

Your radio has 2 station order settings from which you can choose. The station order settings are
alphanumeric and ensemble.
NOTE
The default station order on your radio is alphanumeric.
1
Press the Power On / Off button to switch on your radio.
2
Press the Source button to select DAB band.
DAB
<DRC
DRC
<DRC off
DRC
<DRC high
DRC
<DRC low
>
*
>
>
>
17