Setting The Alarm Clock - PERFECTPRO UBOX 500R Mode D'emploi

Setting the alarm clock

Your radio has two separate alarms which can be set to wake you to either the radio or a buzzer alarm.
In the event of a power interruption your radio has built in memory that will retain your alarm settings.
Ensure that the time is set correctly before setting the alarms.
NOTE
When using batteries only and the radio is switched off, the alarms can't be set and activated.
NOTE
If no buttons are pressed for 10 seconds, the radio will exit the alarm setup.
1
Press and release the Alarm 1 button, for example. "Alarm
1: Setting" will show on the display.
NOTE
If the time is not set before setting the alarms, "Time
not set" will show on the display. Then Use the
Tuning control knob to set the time and date. When
the setting is complete, proceed to step 2.
2
Press the Tuning control knob to enter the alarm setting.
Rotate the Tuning control knob to select "On" or "Off". If
"Off" is selected any current setting for that alarm will be
cancelled. With "On" selected, press the Tuning control
3
Rotate the Tuning control knob to choose the desired hour
for the alarm and then press the Tuning control knob to
cause the alarm minute
4
Rotate the Tuning control knob to choose the desired minute
for the alarm and then press the Tuning control knob.
NOTE
If the radio has been set to the 12 hour clock format,
there will also be an option here for setting AM or PM
for t he alarm time. Rotate the Tuning control knob
to select AM or PM. Press the Tuning control knob to
5
Rotate the Tuning control knob to choose the desired
source for the alarm (DAB, FM, Buzzer).
Press the Tuning control knob when the desired source
alarm is highlighted on the display. If setting alarm to
Buzzer proceed to step 6.
Alarm 1:Setting
Alarm 1:Setting
the display.
Alarm 1:Time
Alarm 1:Mode
Alarm 1:Mode
Alarm 1:Mode
Last listened
Alarm 1:Mode
Off
On
10:00
Buzzer
FM
35