PERFECTPRO UBOX 500R Mode D'emploi page 24

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Preset stations in DAB and FM modes
There are 5 memory presets for each DAB / FM wavebands.
1
Press the Power On / Off button to switch on your radio.
2
Tune to the required station as previously described.
3
Press and hold the required Preset button until the display
shows e.g. Preset 1 saved. The station will be stored
under the chosen preset button. The corresponding preset
number e.g."P1" will show on the display. Repeat this
procedure for the remaining presets.
4
Station stored in the memories may be over written by following the above procedure.
Recall a preset in DAB and FM modes
1
Press the Power On / Off button to turn on the radio.
2
Press the Source button to select the required waveband.
3
Momentarily press the required Preset button, the preset
number and station will appear in the display.
NOTE
The display will show "Preset empty" if no station has been stored to that preset.
22
Preset 1
saved
87.50MHz
[No RadioText]
P1

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ub500r

Table des Matières