Battery Charging Indicator - PERFECTPRO UBOX 500R Mode D'emploi

Battery charging indicator

Please note that the battery charging status detection can only be activated when the radio is in
charging mode (i.e. the radio is switched off, the battery switch slides to the NiHM position and it is
connected to the AC mains socket).
When charging is in progress, display is shown at right
1
and the charging indicator LED flashes green.
2 When the charging process is completed, display is
shown at right and the charging indicator LED lights in
steady green.
3
If batteries are already fully charged, display is shown
at right and it will switch to standby mode after 5 seconds.
4
When there is no battery / missing batteries in the
compartment or some of batteries are inserted with
the incorrect polarity, display is shown at right and it will
enter standby screen after 5 seconds.
NOTE
If a battery is removed while charging, display is
shown at right and the charging indicator LED lights
red.
5
During the charging process, if a battery is detected as
faulty / damaged, a solid square will be displayed under
the corresponding battery number (see picture right) and
the charging indicator LED flashes red.
Battery 123456
Charging
Battery 123456
Capacity
Battery Full
No cell
Battery 123456
Error
11