Pot Move Function; Pot Speed Test Function - Kuppersbusch KI9820.0SF Mode D'emploi

•
Delete setting on a zone:
Action
Select a zone with [ ]
Enter on the Menu
Memorize setting

Pot move function

This function allows to invert 2 zones with all parameters.
•
Invert 2 zones:
Action
Select a zone
Move the zone

Pot Speed Test function

With induction technology the cookware is an important part of the cooking system.
As a part of the cooking system, you should make sure that the cookware you are using, offers the best cooking
experience by giving back the high performance level of our induction hob.
The Pot speed Test function offers the possibility to measure the efficiency and the heating rate of your cookware.
The test can only be performed when there is no current cooking operation and only on the zone specified below.
Each action has to be done in the 6 seconds after the previous one.
Put the cookware on test zone
Start the hob
Press on/off key [ ]
Control panel
Press display [ 0 ] selected
Press menu key [ ]
Press 3s on the "SLIDER" under the
[ ] light
Control panel
Press 3s on display of a zone
Press another zone or move a pot
Display
[ 0 ] and [
the menu is displayed
[ 0 ]
Display
All other zones blink
The two zones are switched
41
]
Test zone