Brightness Setting; Loudness Setting; My Function ( Not Available On Samples ) - Kuppersbusch KI9820.0SF Mode D'emploi

Brightness Setting

This function allows to change the brightness level.
•
Change the Brightness level:
Action
Enter on the Menu
Enter on the Brightness setting Press on the "SLIDER" under the
Change the Brightness level
Validate the setting

Loudness Setting

This function allows to change the loudness level.
•
Change the loudness level:
Action
Enter on the Menu
Enter on the Loudness setting Press on the "SLIDER" under the
Change the Loudness level
Validate the setting
MY function
After having set cooking level and timer value for the zone, it is possible to memorize the settings on the same zone.
• cooking stages of cooking zone (power)
• minutes and seconds of programmed cooking zone-related timer
• Keep warm function
• Automatic cooking function
•
Memorize setting on a zone:
Action
Zone selection
to set (adjust the power
on « 7 », for example)
Select« Timer »
Set the units
Validate the units
Set the tens
Validate the tens
Select the zone
Enter on the Menu
Memorize setting
•
Recall setting on a zone:
Action
Select a zone with [ ]
Enter on the Menu
Memorize setting
Control panel
Press menu key [ ]
[ ] light
Slide on the "SLIDER"
Press menu key [ ]
Control panel
Press menu key [ ]
[ ] light
Slide on the "SLIDER"
Press menu key [ ]
Control panel
press display [ 0 ] selected
slide on the "SLIDER"
to the right or to the left
press 2s timer/counter display
slide on the "SLIDER" to [ 9 ]
press display [ 09 ]
slide on the "SLIDER" to [ 2 ]
wait 2 seconds
press display [ 7 ] selected
Press menu key [ ]
Press 3s on the "SLIDER" under the
[ ] light
Control panel
Press display [ 0 ] selected
Press menu key [ ]
Press on the "SLIDER" under the
[ ] light
Display
the menu is displayed
the "SLIDER" displays the brightness level
the "SLIDER" displays the brightness level
[ 0 ]
Display
the menu is displayed
the "SLIDER" displays the loudness level
the "SLIDER" displays the loudness level
[ 0 ]
Display
[ 0 ]
[ 7 ]
[ 00 ]
[ 0 fixed ] [ 9 blinking ]
[ 0 blinking ] [ 9 fixed ]
[ 2 blinking ] [ 9 fixed ]
[ 29 ]
[ 7 ]
the menu is displayed
[ ] next to the [ 7 ]
Display
[ 0 ] and [
the menu is displayed
[ ] next to the [ 7 ] and [ 29 ] on the
timer display
40
]