Stop Function; Recall Function - Kuppersbusch EKID9940.0 Mode D'emploi

Operation
30

STOP function

The cooking process can be briefly interrupted with the STOP function, e.g. if
the doorbell rings. The STOP function must be released in order to continue
cooking at the same power level. If a timer has been set it will pause and will
then continue.
This function is only available for 10 minutes for reasons of safety. The hob
will then be switched off.
1. Pots and pans are on the cooking zones and the required power levels
have been set.
2. Press the STOP key
interval sign will light up.
3. The interruption is ended by firstly pressing the STOP key
the flashing sensor field
When operating the sensor field slide over the complete sensor field.
The second key must be pressed within 10 seconds as otherwise the
stop function remains.

Recall function

(Restoration function)
After inadvertently switching the hob off the last setting can be restored.
The Recall function only works if at least one cooking zone is switched on.
1. The hob is inadvertently turned off by the ON/OFF key hob
2. Within 6 seconds after turning it off, press the ON/OFF key hob
again. The LED on the STOP button flashes.
Then immediately press the STOP key
The original cooking levels are restored. The cooking process is conti-
nued.
What can be restored:
- Cooking levels of all cooking zones
- Minutes and seconds of programmed timer functions
- Automatic boost function
- Power level
Not to be restored:
- Operation time limit (it is counted from 0)
. Instead of the selected power settings, the
left of the STOP key.
.
GB
and then
.