Booster Function; Timer - Kuppersbusch KI9820.0SF Mode D'emploi

Booster function

The Booster function [ P ] and the Double Booster [
If this function is activated the heating zones work for 10 minutes with an ultra high Booster.
Booster is useful for example to heat up rapidly big quantities of water, like rice, pasta or noodles.
•
Start up / Stop the booster function:
Action
Zone selection
Start up the Booster
Stop the Booster
•
Start up / Stop the double booster function:
Action
Selection of the zone
Start up Booster
Start up Double Booster
Stop the Double Booster
Stop Booster
•
Power management:
The total cooking hob is equipped with an overall maximum of Booster power. When the Booster function is activated,
the electronic system automatically regulates all "Boosters" selected to equalise the available power to each element
selected for booster. The display is blinking on [ 9 ] for a few seconds and then shows the maximum of Booster
allowed :
Heating zone selected
[ P ] is displayed

Timer

The timer is able to be used simultaneous with all heating zones and this with different time settings (from 0 to 99
minutes) for each heating zone.
•
Setting and modification of the cooking time :
Example for 16 minutes at power 7 :
Action
Zone selection
Select the power level
Select « Timer »
Set the tens
Validate the tens
Set the units
Validate the units
The time is confirmed and the cooking starts.
•
To stop the cooking time:
Example for 13 minutes at power 7 :
Action
Zone selection
Select « Timer »
Set the tens
Validate the tens
Set the units
Validate the units
Control panel
Press key [ 0 ] from the zone
Press key [ B² ]
Slide on the "SLIDER"
Control panel
Press key [ 0 ]
Press key [ B² ]
Re-press key [ B² ]
Press key [ B² ]
Slide on the "SLIDER"
The other heating zone: (example: Booster level 9)
[ 9 ] goes to [ 6 ] or [ 8 ] depending on the type of zone
Control panel
press display [ 0 ] selected
slide on the "SLIDER" to [ 7 ]
press 3s the timer/counter display
slide on the "SLIDER" to [ 1 ]
press display [ 10 ]
slide on the "SLIDER" to [ 6 ]
wait 2 seconds
Control panel
press display [ 7 ] selected
press 3s key [ 13 ]
slide on the "SLIDER" to [ 0 ]
press display [ 10 ]
slide on the "SLIDER" to [ 0 ]
wait 2 seconds
] adds a booster power to the selected heating zone.
Display
[ 0 ]
[ P ]
[ 9 ] to [ 0 ]
Display
[ 0 ]
[ P ]
[ and P ]
[ P ]
[ 9 ] to [ 0 ]
Display
[ 0 ] and control light on
[ 7 ]
[ 00 ]
[ 1 blinking ] [ 0 fixed ]
[ 1 fixed ] [ 0 blinking ]
[ 1 fixed ] [ 6 blinking ]
[ 16 ]
Display
[ 7 ] and control light on
[ 13 ]
[ 0 blinking ] [ 3 fixed ]
[ 0 fixed ] [ 3 blinking ]
[ 0 fixed ] [ 0 blinking ]
[ 00 ]
36