Booster Function; Control Panel Locking - Kuppersbusch KI8810.0SR Mode D'emploi

Booster function

The booster function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones works during 5 minutes with an ultra high power.
The booster is foreseen for example to heat up rapidely big quantities of water, like nuddles cooking.
•
Start up / Stop the booster function :
Action
Start up the booster
Stop the booster
•
Power management:
When it comes to the power, the cooking zones are running by pairs and cannot exceed an overall
maximum of power. If the selected heating levels for both zones exceed the maximum available
amount of power, the powermanagement function is automatically reducing the power from one of
these zones. The display of this zone is first blinling ; the level is then automatically reduced to the
highest suitable position.
Heating zone selected
[ P ] is displayed

Control panel locking

To avoid modifying a setting of cooking zones , in particular with within the framework of
cleaning.
• Locking :
Action
Hob locking
• Unlocking :
Action
Unlocking the hob
Control panel
Turn the knob in the clockwise,
beyond the [ 9 ]
Turn the knob in the anticlockwise
The other heating zone: (example: power level 9)
[ 9 ] goes to [ 8 ] and blinks
Control panel
Turn two left the knobs in the
anticlockwise, beyond the [ 0 ]
during 3 seconds
Control panel
Turn two left the knobs in the
anticlockwise, beyond the [ 0 ]
during 3 seconds
25
Display
[ P ] during 5 min
[ 8 ] to [ 0 ]
Display
[ L ]
Display
[ L ]