Télécharger Imprimer la page

Fitting Instructions - gdw 1473T60 Instructions De Montage

Publicité

Les langues disponibles

Les langues disponibles

BMW 5 sedan
07/2003 - ....
Ref. 1473T60

Fitting instructions

1)
Disassemble the bumper and the plastic locking piece, remove the inner coating. Disassemble the metal buffer
beam and permanently remove the supports of the buffer beam.
2)
Place the tow bar with the points (A) against the back of the vehicle on the provided screw-thread drillings where
the metal buffer was fixed. Insert the bolts and the security washers and tighten everything firmly (according to
tension). Assemble the metal buffer beam on the points (B) of the tow bar.
3)
Make an incision in the bottom of the plastic locking piece as on drawing and re-assemble the piece on the
vehicle.
4)
Assemble the pedestal of the detachable system T60, together with the supporting piece of the socket plate (-p).
Insert the bolts and tighten everything firmly.
5)
Assemble afterwards the socket plate P36 according to fitting instructions enclosed.
6)
Assemble the bumper on the vehicle.
Disassembly bumper break version.
- L+R 4 screws on the splashboard
- L+R 1 plastic plug at the bottom of the splashboard
- entrance trunk L+R 1 screw in the rear
- fixed at the bottom in the middle
- loosen the sides to the outside
Disassembly bumper sedan version.
- L+R 4 screws on the splashboard
- L+R 1 plastic plug at the bottom of the splashboard
- in the trunk, in side compartments, 2 screws against the rear panel and 2 screws in the corners
- fixed at the bottom in the middle
- loosen the sides to the outside
Composition
Tow bar reference 1473T60
1 folding socket plate (-p)
8 bolts M10x35 - DIN933
12 security washers M10 - DIN128A
8 washers ø25x10,5x4mm DIN7349
4 bolts M10x30 - DIN933
4 nuts M10 - DIN934
8 washers ø20x10,5x2mm
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
+ break
(type E60)
(*)
(A)
(A-B)
(A)
(B)
(B)
(B)
All bolts and nuts: quality 8.8
(type E61)
04/2004 - ....

Publicité

loading