golmar V2PLUS Manuel D'installation page 87

86
A
ssembly the door panel modules
Insert the header DOWN marked in the lower module and fix it by screwing the module shafts
Place the module spacer between lower and next modules, assuring that the spacer adjustment
notches are inside the panel Fix the module by screwing the shafts
case of door panels with one more module (the maximum number of modules placed vertically
is three ).
Insert the header UP marked in the last module and fix it by screwing the supplied screws
DOOR PANEL INSTALLATION
Pass the wiring through the hole made in the bottom part of
the embedding box Level and flush the embedding
box Once the embedding box is placed, remove the .
protective labels from the attaching door panel holes
.
.
P
lace the embedding box
.
. R epeat this procedure in
.
.
.
.