Telephone Installation - golmar V2PLUS Manuel D'installation

TELEPHONE INSTALLATION

F
ix the telephone to the wall
Avoid placing the telephone near sources of heat, in dusty
locations or smoky environments The telephone can be fixed
using an electrical embedding box or directly on the wall, as
shown on the picture If the telephone will be installed directly
over the wall, drill two holes of Ø6mm on the specified
positions, using 6mm wall plugs and Ø3.5 x 25mm screws
.
It is necessary to open the telephone for wiring and fixing
purposes To open the telephone, insert a plain
screwdriver into the slots and gently lever as shown in the
drawing
.
.
P ass the installation wires through the corresponding hole and connect
them as shown on the installation diagrams
shown on the picture Once the telephone is closed, connect the handset
using the telephone cord and put it on the cradle
.
.
.
.
. C lose the telephone as
.
101