FUAVE ACB12K02 Manuel D'instructions page 35

INSTALLATION
The Fuave ACB12K02 is a mobile airconditioning/dehumidifying units that
can be moved from room to room. Install as follows:
• Remove all packaging material, keep it away from childeren and ensure
that the unit remains in an upright position.
• Before use, check that all accessories are present and that there is no
damage to the accessories or the unit itself. Do not use a damaged unit;
take it back to your supplier!
• Place the unit on a sturdy, flat,
dry and horizontal base near an
electrical socket and a discharge
point for hot air, e.g. a window
that can be opened slightly. Make
sure that the unit has at least
30 cm of free space on all sides
and take all safety instructions
into account.
Installation to dehumidifier
• To use the dehumidification function, connect the water drainage hose
to the water drainage point (high) (see picture). This hose should lead
to a bucket or drain. The hose should not run upwards! Your unit is now
ready for use.
32