Cleaning Of The Filter - FUAVE ACB12K02 Manuel D'instructions

Cleaning of the filter

Clean the filter every two
weeks; air conditioning with
dirty filter does not operate
properly. The filter is located
behind the air intake grid at
the back. You can easily open
this grid and remove the filter.
Use a vacuum cleaner or tap
the filters lightly to remove
loose dust and dirt. Then rinse
the filter clean in, at most,
lukewarm water (not warmer
than 40°C.), potentially with a
mild, neutral cleaning agent.
Let the filter dry thoroughly in the shade before placing it back. Attention!
Never operate the air conditioning without the filter!
Einde-seizoen-reiniging
If the device is to be stored for a long period, you must take the
following measures!
• Remove the condensed water. Run the unit for a few hours on fan
function so that the unit is completely dry inside.
• Then switch the air conditioning unit off and remove the plug from
the socket.
• Clean the filters and reposition them or replace with a new ones.
• Unscrew the waste pipe from the device in order to prevent damage.
• Pack the air conditioning unit in its original packaging or in a plastic bag
and place in a dry place for storage. Place a heavy object on the unit.
• Remove the batteries from the remote control.
• Store the device in a room smaller than 15m².
43