General Notes; Disclaimer; Warranty; Scope Of Application - HYDAC ELECTRONIC HAT 1200 Notice D'utilisation

4

1 General notes

1.1 Disclaimer

E
This operating manual was made to the best of our knowledge. Nevertheless and despite
the greatest care, it is possible that it may contain errors. Therefore please understand
that in the absence of any provisions to the contrary hereinafter our warranty and liability
– for any legal reasons whatsoever – are excluded in respect of the information in this
operating manual. In particular, we shall not be liable for lost profit or other financial loss.
This exclusion of liability does not apply in cases of intent and gross negligence.
Moreover, it does not apply to defects which have been deceitfully concealed or whose
absence has been guaranteed, nor in cases of culpable harm to life, physical injury and
damage to health. If we negligently breach any material contractual obligation, our liability
shall be limited to foreseeable damage. Claims due to the Product Liability shall remain
unaffected.
In the event of translation, only the original version of the operating manual in German is
legally valid.

1.2 Warranty

The General Terms and Conditions ("Allgemeine Geschäftsbedingungen") of HYDAC
ELECTRONIC GMBH always apply. These are available to the operator with the order
confirmation or when the contract is concluded at the latest.
You will also find these under www.hydac.com -> General Terms and Conditions.

1.3 Scope of application

These instructions exclusively apply to the following measuring system types:
 HAT 12xx – C01 – xxxx – xxx – xxxx – xxx - S2PD - 000
The products are components of a system/machine, labeled with affixed nameplates.
The following documentation therefore also applies:
 System and machine-specific operating manuals of the operator,
 This manual
Edition: 2021-02-18
Before commissioning, check the instrument and any accessories
supplied. Before commissioning, please read the operating instructions.
Ensure that the unit is suitable for your application.
If the instrument is not handled correctly, or if the operating instructions
and specifications are not adhered to, damage to property or personal
injury can result.
HYDAC ELECTRONIC GMBH
HAT 1200 Analogue Safety
Part No.: 669956