Declaration Of Manufacturer; Abbreviations And Definitions; Security; Definition Of Symbols And Instructions - HYDAC ELECTRONIC HAT 1200 Notice D'utilisation

HAT 1200 Analogue Safety

1.4 Declaration of manufacturer

The measuring systems were developed, designed and manufactured under observation
of the applicable international and European standards and directives.
A corresponding manufacturer's declaration can be requested from HYDAC
ELECTRONIC GMBH.
The manufacturer of the product, HYDAC ELECTRONIC GMBH, operates a certified
quality assurance system in accordance with ISO 9001.

1.5 Abbreviations and definitions

HAT 1200 Absolute measuring singleturn angle sensor.
EC European Community
EMC Electro Magnetic Compatibility
ESD
Electro Static Discharge
IEC International Electrotechnical Commission
NEC National Electrical Code
VDE Verein Deutscher Elektrotechniker (German Electrotechnicians Association)

2 Security

2.1 Definition of symbols and instructions

means that death, serious injury or major damage to property could occur
if the stated precautions are not met.
WARNING !
means that minor injuries or damage to property can occur if the stated
precautions are not met.
CAUTION !
indicates important information or features and application suggestions
for the product used
means that appropriate ESD-protective measures must be considered
according to DIN EN 100 015-1.
(Cause of a potential equalization between body and device-mass as well
as the housing-mass about a high-impedance resistance (approx. 1
MOhm) e.g. with a commercial ESD wrist strap).
Edition: 2021-02-18 HYDAC ELECTRONIC GMBH
5
E
Part No.: 669956