General; Copyright Protection; Exclusion Of Liability; Scope - HYDAC ELECTRONIC HNT 1128-F11- -000 Série Notice D'utilisation

4

1 General

1.1 Copyright Protection

E
This manual, including the illustrations contained therein, is subject to copyright
protection. Use of this manual by third parties in contravention of copyright regulations is
forbidden. Reproduction, translation as well as electronic and photographic archiving
and modification require the written permission of the manufacturer. Violations shall be
liable for damages.

1.2 Exclusion of liability

This operating manual was made to the best of our knowledge. Nevertheless and
despite the greatest care, it cannot be excluded that mistakes could have crept in.
Therefore, please understand that in the absence of any provisions to the contrary
hereinafter our warranty and liability – for any legal reasons whatsoever – are excluded
in respect of the information in this operating manual. In particular, we shall not be liable
for lost profit or other financial loss. This exclusion of liability does not apply in cases of
intent and gross negligence. Moreover, it does not apply to defects which have been
deceitfully concealed or in cases of culpable harm to life, physical injury and damage to
health. In the event that we should negligently breach any material contractual
obligation, our liability shall be limited to the foreseeable loss. Claims due to the Product
Liability shall remain unaffected.
In cases where the translation is used, the text of the original German Assembly and
Repair Instructions shall prevail.

1.3 Scope

This user manual exclusively applies to the following measuring system types:
• HNT 112x-F11-xxxx-000
The products are components of a system, labeled with affixed nameplates.
The following documentation therefore also applies:
• the operator's operating instructions specific to the system,
• this user manual
Status: 2017/06/02
Before commissioning, check the instrument and any accessories supplied.
Before commissioning, please read the operating instructions. Ensure that
the instrument is suitable for your application.
If the instrument is not handled correctly, or if the operating instructions and
specifications are not adhered to, damage to property or personal injury can
result.
HYDAC ELECTRONIC GMBH
HNT 112x-F11-xxxx-000
Mat. No.: 669923