General Notes; Copyright Protection; Disclaimer; Scope Of Application - HYDAC ELECTRONIC HNT 122 000 Serie Notice D'utilisation

4

1 General notes

1.1 Copyright protection

E
This Manual, including the illustrations contained therein, is subject to copyright
protection. Use of this manual by third parties in contravention of copyright regulations is
forbidden. Reproduction, translation as well as electronic and photographic archiving
and modification require the written permission of the manufacturer. Violations shall be
liable for damages.

1.2 Disclaimer

This operating manual was made to the best of our knowledge Nevertheless and despite
the greatest care, it cannot be excluded that mistakes could have crept in. Therefore
please understand that in the absence of any provisions to the contrary hereinafter our
warranty and liability – for any legal reasons whatsoever – are excluded in respect of the
information in this operating manual. In particular, we shall not be liable for lost profit or
other financial loss. This exclusion of liability does not apply in cases of intent and gross
negligence. Moreover, it does not apply to defects which have been deceitfully
concealed or whose absence has been guaranteed, nor in cases of culpable harm to
life, physical injury and damage to health.
contractual obligation, our liability shall be limited to foreseeable damage. Claims due to
the Product Liability shall remain unaffected.
In the event of translation, only the original version of the operating instructions in
German is legally valid.

1.3 Scope of application

These instructions exclusively apply to the following measuring system types:
 HNT 122x-x-xxxx-000
The products are components of a system, labeled with affixed nameplates.
The following documentation therefore also applies:
 the operator's operating instructions specific to the system,
 this manual
Edition: 2017-05-31
All manuals and user guides at all-guides.com
Before commissioning, check the instrument and any accessories
supplied. Before commissioning, please read the operating instructions.
Ensure that the unit is suitable for your application.
If the instrument is not handled correctly, or if the operating instructions
and specifications are not adhered to, damage to property or personal
injury can result.
HYDAC ELECTRONIC GMBH
If we negligently breach any material
HNT 122x-x-xxxx-000
Part No.: 669940