Led Display Control Panel And Function Keys - MW TOOLS BB200 Mode D'emploi

M1.2.BB200.NLFREN 13112018
EN

5 LED display control panel and function keys

Part name of panel and signification
1. Digital readout, amount of imbalance, inside or "DISTANCE" dimension
2. Digital readout, amount of imbalance, outside or "DIAMETER" dimension
3. Digital readout, position of imbalance, inside
4. Digital readout, position of imbalance, outside
5. Indicator, "ALU" correction mode selected
6. Push button, cycle start
7. Push button, emergency and selection of special functions
8. Push button, unbalance display pitch and threshold
9. Push button , selection of "ALU" mode of correction
10. Push button for recalculation and self-calibration
11. Push buttons, manual DISTANCE (a) setting
12. Push buttons, manual WIDTH (b) setting
13. Push buttons, manual DIAMETER (d) setting
14. Push button, optimization of unbalance and split unbalance
15. Selection of dimensions, inch/mm
16. Push button, self-diagnostics, self-calibration and split unbalance
17. Digital readout, "STATIC" unbalance or "WIDTH" dimension
18. Indicator of dimensions in mm
19. Selection, "STATIC" or "DYNAMIC" correction
WARNING! Only use the fingers to press push buttons. Never use the counterweight pincers or
other pointed objects.
Fig. 4-1
Fig. 5-1
41