Safety; Specifications And Features; Specifications; Features - MW TOOLS BB200 Mode D'emploi

M1.2.BB200.NLFREN 13112018
EN

1 Safety

• Read the manual carefully before operating the equipment to ensure normal and safe operation.
• Dismantling or replacing the parts of equipment should be avoided.
• When it needs repairing, please contact with technique service department.
• Before balancing, ensure the wheel fixed on the flange tightly.
• Operator should wear close-fitting smock to prevent from hanging up.
• Non-operator does not start the equipment.
• No use while beyond the stated function range of manual.

2 Specifications and features

2.1 Specifications

Model
Maximum wheel weight
Motor power
Balancing precision
Rotating speed
Cycle time
Rim diameter
Rim width
Noise level
Working temperature
Height above the sea level
Humidity
Net weight
Dimensions (L x w x h)

2.2 Features

• 9 LED display
• 4 balancing modes
• Self-calibration and self fault diagnosis function
• Automatic calculation of depth and position of counterweights
• Applicable for various rims of steel structure and duralumin structure

3 Description of the balancer

Machine
The part of machine consists of support, swing support and main axis. They are together fixed on the frame.
Electricity system
• The microcomputer system is made up of the LSI such as new high speed MCU CPU system and keyboard.
• Automatic measure scale.
• Testing speed and positioning system consists of gear and optoelectronic coupler.
• Two-phase asynchronous motor supplies and controlling circuit.
• Horizontal and vertical pressure sensor.
• Hood protection.
BB200
65 kg
200 W
+ 1 g
200 rpm
8 sec
10 - 24'' (252 - 610 mm)
1,5 - 20'' (40 - 510 mm)
70 dB (A)
5 - 50 °C
< 4000 m
< 85 %
102 kg
960 x 760 x 1250 mm
39