Finishing; Housing Panel Installation; Safety Screen Installation / Removal - Napoleon WHD31P Manuel D'installation Et D'opération

5.0 finishing

EN
WARNING
!
• Risk of fi re!
• Never obstruct the front opening of the appliance.
• Do not strike, slam, or scratch. Do not operate appliance with glass removed, cracked, or scratched.
5.1

housing panel installation

1
Secure the housing panels as illustrated using the 17 #8 X 3/8" screws supplied.
- 4 screws secure the top housing panel.
- 3 screws secure the bottom housing panel.
- 5 screws secure each of the side housing panels.
5.2

safety screen installation / removal

This appliance was shipped complete with a
safety screen. It has been designed to reduce
the risk of burns from the hot viewing glass and
must be installed.
Remove the 3 screws that secure the door.
A.
Place the bottom of the safety screen into
B.
the door retainer. Pivot the top of the safety
screen to the door frame and secure by
using 3 screws to attach the safety screen
and door retainer brackets.
28
W415-1337 / B / 09.25.18
2
45.3
3
RETAINING BRACKETS
DOOR
RETAINER
4
(X3)